“Heat medium boiler” is a kind of high temperature and low pressure heating furnace. The “heat medium” used, such as TRANSCAL N., is a kind of liquid oil with no evaporation. After the oil is heated in the furnace, it is delivered to the radiator by a high temperature pump Or the exchanger, after the heat is emitted, the oil returns to the furnace and continues to circulate and heat continuously.
● Special structure in the furnace, high thermal efficiency and fuel saving.
● Less pressure loss in the furnace reduces pump power.
● The heat medium needs less replenishment.
● Vertical overall design, small footprint, saving installation time and cost.
● The horizontal design has better heat transfer effect and is easy to maintain.
● The inside of the furnace is under negative pressure during operation, so even high-temperature burning gas will not leak out of the furnace.
● Use refractory thermal insulation material, less heat storage. The heat medium will not exceed the allowable temperature during power failure.
● Equipped with an automatic alarm device, an alarm signal will be issued when the operation is wrong, and the combustion will automatically stop.
● Circulating oil pipes are arranged so that there will be no drift phenomenon.
● The heat medium flows and heats in the tube, and the special piping design produces inertia temperature instead of mixing temperature, so there will be no overheating.
● The heat medium in the furnace can be completely discharged by using the height difference.
● Exquisite structure and easy operation, which is more conducive to daily maintenance or annual performance inspection.
Flute-based furnace